19/12/2004:

<Yan> Normally all displays that have a firmware version > 5 are supported
<Yan> I think this is not the case for eurobraille models
<Yan> They are with firmware 3.x or 4.x
<Yan> You sheuld do B0 (on the numeric keypad of the display) to enter in the configuration. It should say:
<Yan> ! CONFIG SYSTEME
<Yan> and then just press the A B C and D keys toghether.


Advices about eurobraille displays I was given by Yannick, thought it could be useful to place it somewhere :)
seb