# My /etc/printcap template for a Canon BJC-4300 printer
# ======================================================
#
# Very Important: refering to doc found on the net and at
# http://www.linuxprinting.org/, you will use the params for a BJC-600 for
# running the BJC-4300 (see also Canon-LP mailinglist).
# Installing printtools may help!
# 
# Also important: verify that you have a /var/spool/lpd with permissions set
# to drwxrwsr-x  lp  lp  and there, a lp0 directory with permissions set to
# drw-------  daemon  lp  (if not, you have to mkdir + chown it).
# Go to /var/spool/lpd/lp0 and do a  touch .seq, chmod 641 .seq and
# chown daemon:lp .seq (if .seq doesn't exist).
# Test printing with: $ lpr file.txt 'enter'
# 
# Just a last tip: verify if mpage, lpr-ppd and gs are present on your
# system.


# /etc/printcap: printer capability database. See printcap(5).
# You can use the filter entries df, tf, cf, gf etc. for
# your own filters. See /etc/filter.ps, /etc/filter.pcl and
# the printcap(5) manual page for further details.


# rlp|Remote printer entry:\
#         :lp=:\
#         :rm=remotehost:\
#         :rp=remoteprinter:\
#         :sd=/var/spool/lpd/remote:\
#         :mx#0:\
#         :sh:
##PRINTTOOL3## LOCAL bjc600 360x360 a4 {} CanonBJC-4300 Default {}
lp0|lp:\
	:sd=/var/spool/lpd/lp0:\
	:mx#0:\
	:sh:\
	:lp=/dev/lp0:\
	:if=/usr/lib/printfilters/master-filter:\
	:PAPERSIZE=a4:\
	:DESIRED_TO=ps:\
	:PRINTER_TYPE=LOCAL:\
	:ASCII_TO_PS=YES:\
	:GSDEVICE=bjc600:\
	:RESOLUTION=360x360:\
	:PS_SEND_EOF=NO:\
	:NUP=1:\
	:RTLFTMAR=18:\
	:TOPBOTMAR=18:\
	:TEXT_SEND_EOF=NO: